basysPrint
Cron
Kodak
ECRM
HuQ
Heights
G&J
Digicut
ITOTEC
Labelmen
RICOH
Color Logic
PixelGlow
Scodix
PixelFoil
.
akk
intaGlios
Canon
Contex
i2s
ITOTEC SC-137Z
The accurate and long-life eRC Series paper cutting machine has further evolved, being released as SC Series. More new functions have been added in pursuit of increased helpfulness and safety.
Ease of maintenance and efficiency are also enhanced. The technology and idea of ITOTEC which is well acquainted with the job site of paper cutting are packed in this new model.
- Lasting accuracy! Powerful double sliding drive
- Safety units having passed model tests
- Assuredness backed by support of CIP4/JDF data
FEATURES & BENEFITS
- Max. cutting width : 1370mm
- Cutting depth : 1320mm
- Clamp opening : 165mm
- Compatible units : paper feeding/ discharging unit, RoboSWIVEL, RoboTRIM
High-accuracy and long-life eRC Series has evolved and arrived in SC Series paper cutting machines. New functions are added in pursuit of helpfulness and safety. The ease of maintenance and efficiency are also enhanced. These paper cutting machines assure future use with full network connectivity. The technology and ideas of ITOTEC mastering every detail in the paper cutting job field are fully installed in this new model.
Major new functions
 A safety beam guard is installed outside at both ends. |
| The sensor reaction area has been widened for safer maintenance services, knife replacement and so on. The location of the device can be changed to inside, similarly to the earlier model. |
 Connect a USB memory or the like to input or output data. |
| A USB port is installed next to the monitor. With additional optional equipment, loaded PDF files such as the instruction manual can be displayed on the monitor. |
 The knife speed and maximum backgauge advance speed are improved. |
| In an operation time comparison experiment, the cutting speed was higher than the earlier model, demonstrating a time reduction effect. |
Lot more. New functions contributing to efficiency enhancement and improved safety.
Features
The touch panel is easy to observe and large. The maximum clamp pressure is increased. The phototube-assisted clamp ascent safety function is activated during pedal operation. The cover of the internal access window is changed to the gate type. The pedal high-pressure function is installed as a standard feature. Soft Clamp. A waste removal window is installed. The operation button is provided with a key top, improving the durability. The dent at the bottom of the main body is eliminated, increasing stability.
 The touch panel is easy to observe and large. |
 The maximum clamp pressure is increased. |
| The size has increased from 8.4” to 10” | The cutting accuracy of boards and vinyl materials is improved. |
 The phototube-assisted clamp ascent safety function is activated during pedal operation. |
 The cover of the internal access window is changed to the gate type. |
| Protection is provided to avoid accidents caused by unintended clamp descent. (Selection can be made between activation ON/OFF). | It can be opened or closed with a single hand. This change has eliminated the process of placing the detached lid, making knife height adjustment or the like smoother. When work is conducted with the cover open, a phototube sensor activates an interlock. (In case of standard outer phototube specification) |
 The pedal high-pressure function is installed as a standard feature. |
 The soft clamp method. |
| ON/OFF selection can be made. | The soft clamp method, with which the clamp pressure applied upon the press of the clamp pedal is suppressed to a low pressure, is adopted as a standard feature. |
 A waste removal window is installed. |
 The operation button is provided with a key top, improving the durability. |
| Paper waste having dropped inside the paper cutting machine can be removed quickly. | The size is increased, improving the ease of pressing. |
 The dent at the bottom of the main body is eliminated, increasing stability. |
Optional features
| Front removal/installation of the false clamp has become possible. |
| A manual knife lifter is prepared. Resin at the backgauge comb teeth. LED cut line. |
 Front removal/installation of the false clamp has become possible (Option). |
| The false clamp can be removed or installed at the front and the attachment for keeping the detached false clamp is installed in front of the main body. |
 A manual knife lifter is prepared (Option). |
| Knife removal/installation can be made smoothly. A knife replacement fixture with a cover is also attached. |
 Resin at the backgauge comb teeth (Option). |
| Damage in the surface plate is suppressed. |
 LED cut line (Option). |
| Visible high-luminance LED lamp. |
High-efficiency work is aimed at.
Large screen with substantial helpful functions.
Bright and visible TFT 10” color LCD touch panel. Because 10 pages are displayed at a time (center hold type scroll), course contents can be checked easily, contributing to reduction of entry errors. The language selection function changes the language among Japanese, English, Chinese (simplified or traditional), Thai, Dutch, Spanish and German. Operation can be conducted in your familiar language.
The control panel located at the core of the SC Series paper cutting machine is programmed with functions needed to operate the paper cutting machine only. It starts immediately after power-on because of absence of unnecessary loads, so that work can be started immediately.
The screen size is increased.
Popup window function
An auxiliary window is stored outside the screen.
The screen can be called up instantly when necessary while it is hidden during
operation on the regular screen.
New Function
Size agreement detection function. Course list view and detail settings. Setting direction window. Print deviation correction function. Automatic knife timing variation function. Clamp pressure setting. Alarm record function. Message window/alarm function.
Size agreement detection function
With this function, paper cutting is disabled if the stored data does not agree
with the backgauge size. The setting can be changed according to the work
so that cutting is performed within a preset range or cutting is performed only upon complete match.
Course list view and detail settings
Information about the vacant or occupied course is displayed on the number panel with 100 courses at a time. The course can be moved or copied on the number panel. Write down the job name or memo of each course to perform an AND search and look at the details of the job on course details view.
Setting direction window
The work setting procedure and direction of paper rotation are displayed clearly in animation.
Print deviation correction function
With this function, deviation of the press sheet from the stored cutting data is corrected. Even if the actual press sheet is dislocated, cut according to register marks. Deviation from the stored data is automatically calculated and the offset is stored. There is no need to enter the offset again.
Automatic knife timing variation function
The paper pressed under the clamp is automatically judged. Even if the stacked paper is high or if paper is pressed with pedal operation, the knife is driven immediately. The time needed for a cutting cycle can be reduced.
Clamp pressure setting
The clamp pressure setting can be entered on the display. The pressure is entered numerically in the range from 2KN to 45KN in 1KN increments, so that variation in the pressure setting is eliminated. The pressure can be preset in each course or each page in addition to presetting in 5KN increments. The pressure can be defined optimally according to the characteristic of the cut item or cutting position, eliminating waste paper caused by the pressure error. Complete cutting operation is supported.
Alarm record function
Description of the failure in the alarm view is stored with the date, time and message. This memory is helpful during maintenance work.
Message window/alarm function
The replacement timing of the knife or oil is indicated with an icon. The current state of the paper cutting machine is visible.
SPECIFICATIONS
| Specifications of machine | SC-137Z |
| Knife driving method | Double pull drive |
| Cutting width | 1370mm |
| Cutting depth | 1320mm |
| Clamp opening | 165mm |
| Min. cutting size (with false clamp) | 105mm 85mm in case of front removal / installation |
| Min. cutting size (without false clamp) | 27mm |
| Front table length | 700mm |
| Table height | 875mm |
| Overall width of machine | 2995mm |
| Machine height | 1660mm |
| Overall length of machine | 2752mm |
| Knife speed | 50cycles/min. ( eRC : 42 cycles/min. ) |
| Knife size | 1610×150×13.7mm |
| Max. backgauge advance speed | 300mm/sec. ( eRC : 225mm/sec. ) |
| Min. clamp pressure | 2kN |
| Max. clamp pressure | 45kN（eRC:40kN） |
| Main motor | 3.7kw |
| Feed motor | 0.75kw |
| Blower motor | 0.75kw |
| Total electric capacity | 5.2kw |
| Mass | 4,500kg |
| Specifications of monitor | SC-137Z |
| Display type | TFT color LCD touch panel |
| Display size | 10” ( eRC : 8.4” ) |
| External communications | Front USB port ( eRC : none ) |
| Memory | 500 courses 25000 pages ( 50 pages/course ) |
| Operation mode | Memory mode, manual mode, semi-automatic mode, fully automatic mode |
| Language | Japanese, English, Chinese ( simplified, traditional ), Thai, Dutch, Spanish, German |
| Keyboard | 50-syllable layout, JIS layout ( QWERTY layout ) selection |
| Input unit | mm, cm, inch, shaku |
| Input value | 0.01mm |
| Max. setting | 9999.99mm ( However, in limited range ) |
| Min. setting | 0.01mm ( However, in limited range ) |
Additional function and optional equipment
| Additional standard function | Pedal high-pressure function (with interlock of phototube safety device) * Selection can be made between use and no use. / waste removal window / knife height adjustment window interlock (in case of standard both phototube outside specification) | ||
| Optional equipment | Front false clamp removal/installation / manual knife lifter (with knife replacement fixture attached with cover) / resin backgauge comb edge / LED cut line / computer instruction manual view (can be added easily upon insertion of an SD card) / large torque specification | ||
